Q7/E300 How to Replace a Controller

Q7/E300 How to Replace a Controller

Because the situation of replacing a controller is relatively rare, when you have this need, you might choose to seek help from a nearby bicycle shop. This means you will need to pay an expensive replacement fee. So today, I will show you how to replace the controller. If you need a video tutorial, you can go to YouTube and watch the replacement video.

Tools: Allen wrench, cable ties, scissors

Step 1: Remove the battery

Step Two: Flip the Bike

Step 3: Remove the left cover

Step 4: Cut off the cable ties that fix the motor wires, and unplug all the wires connected to the controller

Step 5: Replace the controller with a new one, and connect all wires according to the color of the interface.

Step 6: Fasten the motor wires with cable ties

Step 7: Install the left cover

Please perform the replacement operation after watching the video. If you lack the necessary tools and confidence to complete the replacement, you can contact us at service@asomtom.com.

YouTube video link:


Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like View all