As the price of gasoline continues to rise, electric bicycles have become more and more popular as an alternative to automobile travel. As a convenient transportation alternative to automobile travel, more and more people like to ride electric bicycles. At present, it is low-carbon and environmentally friendly, and it can also save you a lot of gasoline costs. Therefore, more and more people invest in electric bicycles. If you buy an electric bicycle, then we need to maintain the electric bicycle. Here, we have some E-bike maintenance, the following is Asomtom is some of our discussions on how to take care of e-bikes,
First of all, the most critical part of any electric bicycle is the motor of the electric bicycle.
The motor is the most important part of the electric bike. Electric bicycles rely on the motor to provide forward power. He's the most critical part of an electric bike, and in terms of importance, he's just as important as the battery. This means that when we maintain electric bicycles, we must maintain the cornerstone as much as possible. In a good working condition, we must carry out daily maintenance and maintenance of the motor. Keep the motor dry. The interior of the motor is closed, so it is difficult for you to see whether there is rust or water stains inside the appliance. If the motor is exposed to rain or regenerated water, it is likely to shock the casing and enter the water, so it is very likely to cause The click is rusted, so we have to avoid letting the motor get into the water, avoid raining with the electric car or form in the water. Sometimes it is unavoidable to encounter heavy rain, but we can at least protect it. When it rains, try to use the bicycle frame to cover the electric bicycle to prevent more rainwater from entering the electric bicycle. After the e-bike gets wet, move it to a place sheltered from the rain as much as possible to dry the e-bike. Of course, there are plenty of e-bikes with motors that are waterproof. For example, our all-terrain fat platform electric bike E300/Q7 waterproof level is motor IP65 waterproof X5. Water resistance is quite high. This shows that the motor can still be waterproof in most cases. All-terrain electric bicycles are designed to withstand a certain degree of waterproofing, but in order to prevent rainwater from infiltrating when riding an electric bicycle in a heavy rain, I wanted to place the bicycle in a dry place as soon as possible, and the electric bicycle was kept in a dry state.
Clean your electric bike regularly.
Electric bicycles need to be cleaned regularly. There is dirt and debris on the tires. However, when cleaning, we need to pay attention to prevent water from entering the motor of electric bicycles. When cleaning electric bicycles, we should avoid water entering electric bicycles. When cleaning electric bicycles, it does not mean that you can soak the bicycle in water to clean. Most of them recommend using a towel or other brush to wipe the dust on the electric bicycle. That's it. Check tire pressure regularly.
Regularly check whether the tire pressure is in a normal state.
The tire pressure has an important impact on the work of the battery and the controller of the electric bicycle. Tires are affected by various factors, and tires are not a closed system. Tire pressure will decrease slowly over time, so we check the air pressure of the electric bike once a month, and then refill the tire pressure according to the air pump and pressure used. If the tire pressure of the bicycle is lower, the work of the electric bicycle will be more difficult, especially for the work of the electric store, it will be more and more difficult. On the contrary, if you keep the tires pressurized and full of air, the electrics of the electric bicycle will work easily, and you will not need to provide too much work, especially in the hot summer, the electric motor will work more quietly and easily. Don't let your e-bike rust. The frame accessories of electric bicycles are all made of metal, so when the electric bicycle is exposed to humid air or moisture, the metal accessories on the electric bicycle will undergo oxidation reaction in the air, and the electric bicycle will rust. Sometimes it's unavoidable, but there are steps we can take to prevent this from happening, as we mentioned above, try to avoid connecting electric bicycles in heavy rain or if you do not expect electric bicycles for a long time, you should store electric bicycles in a dry and warm place. Try to avoid exposing the electric bicycle outdoors for a long time on rainy or snowy days. Because society wreaks havoc on batteries and rusts and has the potential to damage them.
Do not adjust factory settings
Adjusting the factory settings may cause the link to work with higher power than intended. This can cause damage to your motor or battery usage. The factory-set shocks are all working within the rated power and speed range, which will be more helpful for your e-bike in the aftermarket. If you change the factory settings of the electric bicycle, it may be related to the damage of the battery this year, which will not be able to use our factory warranty, so it is best to keep the factory settings unchanged when riding an electric bicycle. The maintenance of these motors should be in a good condition as an electric bicycle, waterproof and your electric bicycle will rust.
This is a point we need to keep in mind at all times to prevent the bicycle from being wet by the rain and prevent the electric bicycle from being exposed to the sun. Regular cleaning and regular checking of your e-bike's tires, air pressure, and getting the best performance out of your e-bike's shocks and batteries, follow these tips and your e-bike will last longer.